This 100 ml spray bottle pairs a transparent PET chamber with a wooden outer case and a small pump sprayer, and it arrives with a clear protective cap sitting over the nozzle. The wood is the first thing anyone notices, and the recessed window is the second: it keeps the case as the dominant surface while leaving a clear strip through which the liquid is visible.
The bottle is made for spraying rather than pouring, so the closure is a pump head rather than a lotion pump or a screw cap. The capacity is fixed at 100 ml, which suits a hand-held mist, a station bottle or a travel-size pack, and lets a formulator or a line operator see the fill level without opening anything.
We run this format inside our plastic bottles wholesale range, so the chamber, the wooden case, the sprayer and the protective cap can be taken as one matched set instead of being assembled from three different suppliers. Brands, distributors and contract formulators use it both as a primary finished-goods bottle and as the spray component of a larger gift or travel kit.
If you are planning a range rather than a single product, this bottle sits comfortably beside our lotion, dropper and jar formats: the wooden case carries the visual signature and only the closure and the capacity change with the product inside. If you need these supplied as plastic bottles with caps and sprayers matched to formats you already buy from us, tell us the shapes you have in mind and we will quote the range as one order.
| Property | Value |
|---|---|
| Capacity | 100 ml |
| Body material | Transparent PET plastic |
| Outer case | Natural wood |
| Case form | Rectangular, with a recessed viewing window |
| Sprayer type | Small pump sprayer, fine mist |
| Nozzle cover | Clear protective cap |
| Body clarity | Transparent; fill level visible through the window |
| Customization | Shape, frame colour and printing |
| Bottle neck | Confirmed against your sprayer and filling drawings |
| Wall thickness | Confirmed against your specification |
| Bottle weight | Confirmed against your specification |
| Dimensional drawing | Available on request for line trials |
Three parts, one assembly
The pack is built from a transparent chamber, a wooden outer case and a pump sprayer with its own protective cap. The case is not a sleeve added after the fact — it wraps the chamber, so the frame contributes to the rigidity of the finished bottle as well as to the way it looks. On a filling line that matters, because a body that flexes under the pump head can disturb sprayer seating and cap torque.
The recessed window
The window is the detail buyers notice first. It keeps the wood as the dominant surface while leaving a clear strip through which the liquid level reads. That works twice over: a shopper can see how much product is left, and a line operator can confirm a fill without disturbing the assembly.
A clear plastic bottle body
The chamber is the plastic bottle body itself: transparent PET, chosen for clarity and for the way it holds its shape at this capacity. Because the wall is clear, colour and print decisions sit on the frame, the sprayer collar or the label rather than on the bottle wall, which keeps the liquid as the visual centre of the pack.
Sprayer and protective cap
The sprayer is a small pump head tuned for a fine mist rather than a coarse stream or a trigger. A clear cap sits over the actuator, so the nozzle is not pressed in transit or on a shelf — the reason a carton of spray bottles sometimes arrives with the top unit already misted is precisely the absence of that cap. We build these as plastic bottle manufacturers working to a fixed assembly, so chamber, case, sprayer and cap are matched to one specification. If you need the fit sheet for your own bill of materials, ask for it at the enquiry stage.
Modular by design
Because the parts are separate, one can change without re-engineering the others. A new case profile, a different print on the chamber or an alternative sprayer can be developed as a modification of an existing assembly rather than as a new project, which keeps tooling and development time proportionate when a brand wants to test a new look.
Wood is a natural material
Cases come in batches, and wood grain and tone shift slightly from run to run. If your brand identity depends on an exact tone, ask us to confirm the case finish against a physical sample, so the wood you approve is the wood you receive.
Brands building a signature look
For a beauty, fragrance or wellness brand, the wooden case does work that a printed label normally does. These buyers usually need a pack that carries their mark without clutter, and they plan it on plastic bottles wholesale terms so the same design can be repeated across a range and a second season without a redesign.
Distributors and cross-border sellers
Distributors buy depth rather than novelty. They want a plastic bottle they can hold in stock, reorder quickly and ship without a high damage rate. Because the case surrounds the chamber and the pack is light for its size, this format tolerates consolidated shipping and multi-drop distribution better than a bare glass bottle of similar capacity.
Contract formulators and filling houses
Filling houses handle several brand accounts at once, so a bottle that runs cleanly on their line is worth more than a novelty shape. Chamber, case, sprayer and cap assemble in a predictable order, and we hold the specification and supply these as wholesale plastic bottles on a repeat schedule, which keeps a filling house stocked across accounts.
Hygiene and professional-use packers
Teams packing alcohol rubs, surface sanitizers and salon products need a bottle that reads as clean and professional and that a staff member can operate one-handed. The transparent chamber shows at a glance when a station bottle needs topping up, and the wooden case keeps the pack presentable in a public setting.
| Formula type | How it behaves through the fine-mist head | What we confirm before production |
| Alcohol-based sanitizer and surface sprays | Water-thin, so the small pump head breaks it into an even, quick-drying mist — the use this format is chiefly known for | Your alcohol concentration, and how the sprayer's internal seals behave against it over a shelf life |
| Cosmetic, facial and hair mists | Pass easily and stay visible through the clear window, so the pack reads as a mist rather than a mystery | Target pH, your fill volume, and whether you want a finer or a slightly wetter output |
| Diluted essential oil and fragrance blends | Spray cleanly once they are cut with alcohol or a solubiliser into a water-thin liquid | The oil load and the carrier, because a heavy oil load is not what this head is built for |
| Neat oils, serums and viscous lotions | Do not pass a fine-mist head at all — the pump stalls or dribbles instead of misting | We will steer you to a lotion pump or dropper format in the same plastic bottles wholesale range rather than sell you a closure that cannot cope |
| Pigmented or powder-carrying formulas | Suspended solids settle in the dip tube and can block the nozzle between uses | Particle size, and whether your product needs a coarser head or a different closure entirely |
| Strongly acidic, alkaline or solvent-heavy cleaners | Sometimes fine, sometimes not — it depends on concentration, not on the product category | A compatibility check on the real formula, and a straight answer if the chamber or the sprayer is the wrong choice for it |
| Anything not on this list | Send the formula type, solvent content, pH and target viscosity with your enquiry | We confirm the head — or quote a different closure — before you commit to a first run |
A transparent chamber, described honestly
The body is clear PET: it lets the fill level read through the window and lets the colour of the product show. It is not an amber or opal container, and we do not present it as UV-protective. If your formula is genuinely light-sensitive — a vitamin C serum, a citrus oil blend, a photosensitive active — a glass format with UV protection from our range will serve it better, and we will say so before you order rather than after.
What the wooden case does, and does not do
The case wraps most of the chamber and leaves one recessed strip visible, so the surface exposed to light is far smaller than on a bare clear bottle, and the pack reads darker on a shelf than its clear plastic body alone would suggest. That is a look-and-handling benefit first; it is not a measured light-barrier figure, and we will not sell it as one. How much light a fill actually sees also depends on storage conditions and how long the pack sits, so plan white or opaque outer packaging if your product demands it.
Documents we can share, and where our answers stop
As plastic bottle manufacturers we can point you to the material documentation we hold for this specification, and to the batch and inspection records behind it. What we cannot do is issue a food-contact, cosmetic, drug or migration approval for your market. Migration behaviour depends on the actual formula, the contact time and the storage temperature, so any statement of that kind has to come from testing your fill inside your own regulatory framework — that boundary sits with you and your compliance team, not with us.
Separating the parts at end of life
The chamber, the wooden case, the sprayer and the protective cap are separate parts and come apart without tools, so a refill, return or take-back scheme can treat them as separate streams instead of one mixed unit. Tell us which recycling or material identification marks your market asks for and we will confirm what can be applied, and to which surface, when we quote.
The small sprayer releases liquid in a controlled, precise dose, which cuts waste and keeps application tidy in everything from industrial sterilisation to cosmetic mists. Its ergonomic shape stays comfortable during long filling or spraying runs, and the durable build stands up to repeated refilling and reuse. Buyers sourcing in volume also gain from the consistent quality that comes with a steady supplier relationship, and the available customisation options help a product stand out on a crowded shelf.
These bottles fit a broad set of industrial workflows, from hand sanitiser and alcohol sprays to cosmetic mists and cleaning agents. Because the spray mechanism is controlled, less fluid is wasted, which keeps filling and usage costs predictable and helps the finished product meet the dosing and labelling rules of the market it is sold in.
Buyers who order in volume gain a more consistent supply chain, while plastic bottle manufacturers can widen their portfolio with a customisable, robust dispensing format. The bottle is light enough to keep freight and storage costs down yet sturdy enough for daily handling, so it works for distributors and end users alike.
Combining a wooden frame with the PET plastic body is what gives the bottle its hybrid character: the frame adds stability and a premium look, while the plastic body keeps the format practical to produce at volume. The construction follows modular design principles, so customisation can be applied without disrupting production scalability.
That balance keeps material usage and assembly efficient, which matters most when the bottle is ordered in large quantities. A matching cap completes the configuration and provides the secure closure needed to protect the contents in transit and in storage.



Hongxin is a bottle packaging manufacturer headquartered in Guangzhou, China, with more than 20 years of industry expertise and a team of over 100 people. Our 37,000 m² production workshop and 328 sets of mechanical equipment cover molding through automatic assembly, supported by a 10,000 m² in-stock warehouse for repeat and regular orders. We take on OEM and ODM projects end to end — product development, mold design, mass production, inspection and delivery — and check every stage from raw-material selection to finished-goods testing.
It is built for thin, sprayable liquids: alcohol and sanitizer solutions, cosmetic and facial mists, hair and scalp mists, diluted aromatherapy and room sprays, and light cleaning solutions. Water-thin and alcohol-based formulas move through a fine-mist sprayer well. Viscous lotions and oils will not pass this type of head at all, and solvent-heavy or strongly acidic formulas need a compatibility check, so describe your formula at the enquiry stage and we will tell you whether this closure is the right one.
The body is transparent PET plastic, chosen for clarity and for the way it keeps its shape at this capacity. The outer case is natural wood, formed as a rectangular block with a recessed window so the liquid level stays visible. A clear protective cap sits over the sprayer nozzle, and the sprayer itself is a small pump head with a fine mist output.
Send us your filling equipment details, the sprayer you intend to use if it is not ours, and your target fill volume. We confirm the neck against your drawing and check sprayer seating before production, and a dimensional drawing is available for a line trial. This is the same check we run whenever we supply plastic bottles with caps and sprayers as a set rather than as separate parts, and it is much cheaper to settle before a run than during one.
Treat it as you would any finished wood surface. Wipe it with a damp cloth rather than soaking or immersing it, keep it out of standing water on a shelf or a bench, and avoid solvent baths on the wood itself. On the filling line, handle the assembled bottle by the body rather than by the pump head, and remember that wood tone shifts slightly between batches, which is normal for a natural material.
The body is transparent PET and the case is wood, and we can point you to the material documentation we hold for this specification. Whether that satisfies your market for a food-contact, cosmetic or medicinal fill depends entirely on the rules you are working to, so raise it at the enquiry stage and let your own compliance team make the final call. We do not present this bottle as approved for drug or medical use.
The chamber, the wooden case, the pump sprayer and the clear protective cap are quoted and supplied as one assembled unit, and we hold the fit between them to a single specification. That is how we supply plastic bottles with caps and sprayers across this range: you receive a finished pack rather than a bottle that still needs a closure sourced elsewhere. If your line already runs its own sprayer or cap, tell us and we will quote the chamber and case on their own, so the plastic bottle still fits your existing component.
This bottle is supplied in a 100 ml capacity. If you want a small companion size for travel kits or sampling — a 20 ml bottle carrying the same wooden case language, for example — tell us your target size at the enquiry stage and our design team will confirm what is available for your project. We answer these requests as plastic bottle manufacturers working from our own tooling, so a companion size is a development question rather than a catalogue order.